1996 Honda Accord Sedan Valve Clearance Adjustment

download
1. Remove the cylinder head cover. 2. Set No.1 piston at TDC . “UP” mark on the camshaft pulley should be at top, and TDC grooves on the camshaft pulley should align with cylinder head surface. 3. Adjust valves on No.1 cylinder. Intake: 0.26 mm ±0.02 mm (0.010 in) ± (0.0008 in) 0.30 mm ±0.02 mm (0.012 in) ±(0.0008 in) 4. Loosen the locknut, and turn the adjusting screw until the feeler gauge slides back and forth with a slight amount of drag. 5. Tighten the locknut and check clearance again. Repeat adjustment if necessary. 6. Rotate crankshaft 180° counterclockwise (Camshaft pulley turns 90°) . The “UP” mark should be on the exhaust side. Adjust valves on No.3 cylinder 7. Rotate crankshaft 180° counterclockwise to bring No.4 piston to TDC . Both TDC grooves are once again visible. Adjust valves on No.4 cylinder